Our London showrooms
Open Mon to Fri 10am - 5pm
Open Saturdays by appointment

Antique Dining Tables

We offer a wide range of the finest antique dining tables. As one of the UK's premier furniture dealers, our aim is to be able to supply dining …

We offer a wide range of the finest antique dining tables. As one of the UK's premier furniture dealers, our aim is to be able to supply dining tables from any period, including Victorian dining tables, William IV dining tables, and Regency dining tables. 

We also supply antique oak dining tables, mahogany dining tables and other varieties made with exotic and desirable timbers. Many of these fine dining tables have exquisite inlaid decorations, but marquetry dining tables are our speciality. 

If you are looking for an antique dining table that suits you own particular requirements, check out our range of bespoke dining tables made by skilled craftsmen using traditional materials and methods.

In addition to antique dining tables, we carry a wide range of dining chairs and often have matching sets available.

Browse below through our online stock of antique dining tables, or visit our showroom.

Show more
Ref: A3936
Vintage 17ft 5 meter Floral Marquetry Burr Walnut Dining Table 20th C

Vintage 17ft / 5 meter Floral Marquetry Burr Walnut Dining Table 20th C

This is a fantastic Vintage Victorian Revival 5 meter burr walnut and marquetry  dining room table, dating from the last quarter of the 20th Century. The table is made from book matched burr walnut veneers which have a really beautiful colour and grain. It has four leaves which can be added or removed as required to suit the occasion by a special double winding mechanism. When completely wound in, the table is transformed into a circular dining table six feet in diameter. It is raised on six elegantly carved legs for stability and they terminate in brass cup castors. The table top has a band of exquisite hand cut floral marquetry and this regal decoration includes bouquets of beautiful flowers. This stunning table would also be appropriate for a conference room, whatever its function it will make a profound impact on your guests and will receive the maximum amount of attention wherever it is placed. Provenance: Purchased from an Embassy in a large five storey house in Knightsbridge, London.   Condition: In really excellent condition having been beautifully cleaned, French polished and waxed in our workshops, please see photos for confirmation.  

Dimensions in cm:

Height 82 x Width 500 x Depth 180 - Fully Extended

Height 82 x Width 180 x Depth 180 - when fully closed

Dimensions in inches:

Height 2 foot, 8 inches x Width 16 foot, 5 inches x Depth 5 foot, 11 inches - Fully Extended

Height 2 foot, 8 inches x Width 5 foot, 11 inches x Depth 5 foot, 11 inches - when fully closed

£17,500.00
Ref: 09428a
Bespoke 17ft Dining Table, Pewter, Lapis Lazuli & Agate Inlaid & 16 Chairs

Bespoke 17ft Dining Table, Pewter, Lapis Lazuli & Agate Inlaid & 16 Chairs

This is a wonderful bespoke large handmade Louis Revival dining suite comprising a 5 meter dining table with 16 chairs. The table, crafted in burr walnut  features exceptional quality marquetry with pewter, lapis lazuli and agate. Seating sixteen people in royal comfort, it is an amazing piece of luxury furniture which will add splendour to any room. Also appropriate for a conference room or any commercial space such as a feature piece in a hotel dining room or lobby, it is sure to be a talking point. Due to its beautifully figured grain, burr walnut has been used for centuries by fine furniture makers. This large dining table has been further embellished with superb inlaid floral marquetry with burr walnut inlaid in pewter and various coloured veneers comprising cherry, pear, amboyna, burr walnut, magnolia, and tulipwood  with inserts of lapis lazuli. To highlight the natural grain of the wood and the excellent artistry of the marquetry, we have French polished this large dining table by hand. The skirt of the table is decorated with ormolu mounts inset with semi precious stones, such as agate, cornelian, malachite, etc,. This wonderful large dining table is raised on two burr walnut ebonised and inlaid pedestals that are raised on  hand carved  lion's paw feet. Being a bespoke handmade table we can make it to your specifications and size. The matching set of 16 chairs comprises fourteen side chairs and a pair of armchairs. The chairs are made of solid walnut, have been beautifully French polished and upholstered, and the exquiste marquetry decoration is hand cut to match the table. The drop in seats can be removed in hot weather so that the cane seats below can be utilised. The Making of this Marquetry Masterpiece Please take a few moments to watch our video which explains how this wonderful large dining table was made. We are very lucky to have third-generation master craftspeople working in our Italian workshop where this wonderful large dining table was made. It has been made with the greatest care and attention to detail. As you can imagine, making such fine large dining tables is a complex process involving lots of phases requiring a great deal of skill and craftsmanship. Condition: In excellent condition, please see photos for confirmation.  

Dimensions in cm:

Height 80 x Width 500 x Depth 128 - Table

Height 105 x Width 48 x Depth 46 - Chairs

Height 105 x Width 56 x Depth 53 - Armchairs

Height 53 - Seat height

Dimensions in inches:

Height 2 foot, 7 inches x Width 16 foot, 5 inches x Depth 4 foot, 2 inches - Table

Height 3 foot, 5 inches x Width 1 foot, 7 inches x Depth 1 foot, 6 inches - Chairs

Height 3 foot, 5 inches x Width 1 foot, 10 inches x Depth 1 foot, 9 inches - Armchairs

Height 1 foot, 9 inches - Seat height

£27,500.00
Ref: 09428
17ft Marquetry Bespoke Dining Table, Pewter, Lapis Lazuli & Agate Inlaid

17ft Marquetry Bespoke Dining Table, Pewter, Lapis Lazuli & Agate Inlaid

This is a wonderful handmade Victorian style large bespoke dining table. Crafted in burr walnut, it features exceptional quality marquetry with pewter, lapis lazuli and agate. Seating sixteen people in royal comfort, it is an amazing piece of luxury furniture which will add splendour to any room. Also appropriate for a conference room or any commercial space such as a hotel dining room or lobby, it is sure to be a talking point. This large bespoke dining table has been further embellished with superb inlaid floral marquetry and burr walnut inlaid in pewter and various coloured veneers comprising cherry, pear, amboyna, burr walnut, magnolia, and tulipwood, with inserts of lapis lazuli. To highlight the natural grain of the wood and the excellent artistry of the marquetry, we have French polished this large dining table by hand. The skirt of the table is decorated with ormolu mounts inset with agate. This wonderful large bespoke dining table is raised on two burr walnut ebonised and inlaid pedestals that are raised on hand-carved solid mahogany lion's paw feet. The set of chairs shown in the photos are also available at an additional cost. The Making of this Marquetry Masterpiece Please take a few moments to watch our video above which shows how this wonderful large dining table was made. We are very lucky to have third-generation master craftspeople in our Italian workshop where this wonderful large dining table was made. It has been made with the greatest of care and attention to detail. As you can imagine, making such fine large dining tables is a complex process involving numerous stages that require a great deal of skill and craftsmanship. Condition: In excellent condition, please see photos for confirmation.

Dimensions in cm:

Height 80 x Width 500 x Depth 128

Dimensions in inches:

Height 2 foot, 7 inches x Width 16 foot, 5 inches x Depth 4 foot, 2 inches

£18,950.00
Ref: A3320
Bespoke Handmade 7ft Burr Walnut & Marquetry Dining Table

Bespoke Handmade 7ft Burr Walnut & Marquetry Dining Table

This is a fantastic bespoke handmade burr walnut marquetry dining table that can seat eight people in great comfort. It is made from burr walnut which  has a beautiful grain and the hand cut floral marquetry decoration compliments it beautifully.  The  exquisite hand cut inlaid floral marquetry decorations of bouquets of flowers, vases and garlands  are cut from different veneers  which are of various colours. To highlight the marquetry, as well as the natural grain of the wood, this table has been expertly  French polished by hand. It has one 60cm  leaf which  can be added or removed as required to suit the occasion by a special winding mechanism, and it stands on elegantly carved and inlaid legs which terminate in brass cap castors. This stunning table will make a profound impression on your dinner guests  and will receive the maximum amount of attention wherever it is placed. The chairs that are shown in the photographs are not included in the price but are available if required. Condition: This is a new bespoke handmade table.   The making of a marquetry masterpiece The making of a bespoke marquetry dining table involves many phases - carried out with the highest level of attention to detail - by third generation master craftsmen in our workshop in Italy. First the design of the marquetry is drawn on paper. The paper is then glued on to a sheet of plywood and the veneers are attached to the underside with pins. There can be a maximum of 16 sheets of veneer.  In this case, there are 8 for the burr walnut and 8 for the marquetry. With a fret cutter, using a very fine blade, the marquetry is cut out, using the burr walnut and various coloured veneers to compose the flowers. Today we use an electric fret cutter, although in the 18th and 19th centuries the cutters were operated by treadles. All of the cut out pieces of veneer are then placed on a large tray. They are then singed by being placed in hot sand in a red hot crucible. This singed effect gives different shades to the various veneers, depending on how deep and how long they are left in the hot sand. The various items of veneer are then inserted into the burr walnut one by one. After they are inserted, tape is placed over them to keep them in place. They are then turned over and a sheet of glued paper is placed over them all, after which the tape can be removed. The prepared solid mahogany table is then veneered with mahogany - twice on the under side, horizontally and vertically, and then once on the top side. The prepared marquetry and burr walnut sheet is then placed on top and the whole table top is placed into a hot press, which glues the sheet to the top. The backing paper can then be sanded off. The table top is then veneered 4 times to prevent the top from bowing or warping. Once the assembly is complete, the table is French polished by hand using natural products, resulting in a stunning bespoke masterpiece of marquetry.

Dimensions in cm:

Height 78 x Width 210 x Depth 110 - Fully Extended

Height 78 x Width 150 x Depth 110 - With the leaf removed

Dimensions in inches:

Height 2 foot, 7 inches x Width 6 foot, 11 inches x Depth 3 foot, 7 inches - Fully Extended

Height 2 foot, 7 inches x Width 4 foot, 11 inches x Depth 3 foot, 7 inches - With the leaf removed

£4,850.00
Ref: A1203
Stunning Bespoke Handmade 14ft Marquetry Burr Walnut Dining Table

Stunning Bespoke Handmade 14ft Marquetry Burr Walnut Dining Table

A fabulous hand made bespoke burr walnut and floral marquetry 14ft dining table. It is made from burr walnut which  has a beautiful grain and to highlight the grain it has been expertly French polished in our workshops.  The table has four  leaves which can be added or removed as required to suit the ocassion by a special double wind out mechanism. When completely wound in and the leaves are all removed the table is transformed into a 150cm ( 5Ft ) diameter dining table.  The table is raised on six elegantly carved legs that give the table its superb stability, and they terminate in brass cap castors. The table features exquisite hand cut marquetry decoration and these regal decorations include bouquets of flowers, vases, swirls and geometric designs. This table would also be appropriate for a conference room, but whatever its function, it will make a profound impact on your guests and will receive the maximum amount of attention wherever it is placed Please note that the chairs in the photographs are not included in the price but are available to purchase if required. Condition: This is a new bespoke handmade table.   The making of a marquetry masterpiece The making of a bespoke marquetry dining table involves many phases - carried out with the highest level of attention to detail - by third generation master craftsmen in our workshop in Italy. First the design of the marquetry is drawn on paper. The paper is then glued on to a sheet of plywood and the veneers are attached to the underside with pins. There can be a maximum of 16 sheets of veneer.  In this case, there are 8 for the burr walnut and 8 for the marquetry. With a fret cutter, using a very fine blade, the marquetry is cut out, using the burr walnut and various coloured veneers to compose the flowers. Today we use an electric fret cutter, although in the 18th and 19th centuries the cutters were operated by treadles. All of the cut out pieces of veneer are then placed on a large tray. They are then singed by being placed in hot sand in a red hot crucible. This singed effect gives different shades to the various veneers, depending on how deep and how long they are left in the hot sand. The various items of veneer are then inserted into the burr walnut one by one. After they are inserted, tape is placed over them to keep them in place. They are then turned over and a sheet of glued paper is placed over them all, after which the tape can be removed. The prepared solid mahogany table is then veneered with mahogany - twice on the under side, horizontally and vertically, and then once on the top side. The prepared marquetry and burr walnut sheet is then placed on top and the whole table top is placed into a hot press, which glues the sheet to the top. The backing paper can then be sanded off. The table top is then veneered 4 times to prevent the top from bowing or warping. Once the assembly is complete, the table is French polished by hand using natural products, resulting in a stunning bespoke masterpiece of marquetry.

Dimensions in cm:

Height 79 x Width 430 x Depth 150 - Fully extended

Height 79 x Width 150 x Depth 150 - With all leaves removed

Dimensions in inches:

Height 2 foot, 7 inches x Width 14 feet, 1 inch x Depth 4 foot, 11 inches - Fully extended

Height 2 foot, 7 inches x Width 4 foot, 11 inches x Depth 4 foot, 11 inches - With all leaves removed

£12,950.00
Ref: 01213
Huge 5 Meter Marquetry Extending Burr Walnut Bespoke Dining Table

Huge 5 Meter Marquetry Extending Burr Walnut Bespoke Dining Table

Wonderful bespoke handmade Victorian style large dining table crafted in burr walnut featuring exceptional inlaid marquetry. Seating sixteen people in royal comfort, this is an amazing piece of luxury furniture which will add splendour to any room. This large bespoke dining table is also appropriate for a conference room or any commercial space such as a hotel dining room or lobby, where it is sure to be a talking point. Due to its beautifully-shaped grain, burr walnut has been used for centuries by fine furniture makers. This large bespoke dining table has been further embellished with superb inlaid marquetry foliate decoration. The wonderful hand-cut inlaid marquetry decoration of entwined leaves and flowers is made from wood veneers of various shades. To highlight the natural grain of the wood and the excellent artistry of the marquetry, we have French polished this large dining table by hand. This large bespoke dining table can be extended with four leaves using a double wind out mechanism. This flexibility means this large dining table can be converted into a smaller table to suit any occasion. It stands on six beautifully carved legs terminating with brass castors. The set of chairs shown in the photos is also available at an additional cost. Condition: This is brand new bespoke handmade large dining table. As such it is in perfect and pristine condition. The Making of this Marquetry Masterpiece Please take a few moments to watch our video above which explains how this wonderful large dining table was made. You can also read about this below where we explain the process. We are very lucky to have third-generation master craftspeople working in our Italian workshop where this wonderful large dining table was made. It has been made with the greatest care and attention to detail.

Dimensions in cm:

Height 79 x Width 500 x Depth 180 - When fully extended

Height 79 x Width 180 x Depth 180 - When fully closed

Dimensions in inches:

Height 2 foot, 7 inches x Width 16 foot, 5 inches x Depth 5 foot, 11 inches - When fully extended

Height 2 foot, 7 inches x Width 5 foot, 11 inches x Depth 5 foot, 11 inches - When fully closed

£14,950.00
Ref: A2849
Antique 8ft Regency Metamorphic 3 Pillar Dining Table C1820 19th C

Antique 8ft Regency Metamorphic 3 Pillar Dining Table C1820 19th C

This is a fabulous high quality antique flame mahogany Regency Period metamorphic triple pillar  dining table that can seat 10 people in comfort, dating from Circa 1820.   It is raised on three bases, each with four sabre legs that terminate in brass cap castors. The table can easily be converted from a ten seater dining table into a six seater dining table, and a drop flap pembroke table by removing the clips. Or it can be converted into a pembroke table and a pair of console tables. The pembroke table is fitted with a useful drawer.   There is no mistaking the fine craftsmanship of this handsome dining table which is certain to become a treasured addition to your furniture collection, and a talking point with guests at meal times.     Condition:   In excellent condition having been beautifully cleaned polished and waxed in our workshops, please see photos for confirmation.

Dimensions in cm:

Height 73 x Width 241 x Depth 111 - Fully Extended dining Table

Height 73 x Width 126 x Depth 111 - Table With centre removed

Height 73 x Width 114 x Depth 111 - Central Pembroke table Flaps up

Height 73 x Width 58 x Depth 111 - Central Pembroke table Flaps Down

Height 73 x Width 63 x Depth 111 - Pair consoles- Each

Dimensions in inches:

Height 2 foot, 5 inches x Width 7 foot, 11 inches x Depth 3 foot, 8 inches - Fully Extended dining Table

Height 2 foot, 5 inches x Width 4 foot, 2 inches x Depth 3 foot, 8 inches - Table With centre removed

Height 2 foot, 5 inches x Width 3 foot, 9 inches x Depth 3 foot, 8 inches - Central Pembroke table Flaps up

Height 2 foot, 5 inches x Width 1 foot, 11 inches x Depth 3 foot, 8 inches - Central Pembroke table Flaps Down

Height 2 foot, 5 inches x Width 2 feet, 1 inch x Depth 3 foot, 8 inches - Pair consoles- Each

£9,250.00
Ref: A2727
Vintage 8ft Diameter Flame Mahogany Regency Revival Dining Table 20th C

Vintage 8ft Diameter Flame Mahogany Regency Revival Dining Table 20th C

A beautiful Regency Revival dining table dating from the mid 20th century. The table is of fabulous quality, is in excellent condition and is also highly desirable.  A large round table is perfect for dinner parties as all the guests can talk to each other easily. The botanical name for the mahogany this table is made of is Swietenia Macrophylla and this type of mahogany is not subject to CITES regulation. The monumental circular table top has been crafted from wonderful flame mahogany in a sunburst pattern and has a crossbanded border with an inlaid line separating it. The fabulous centre base is reminiscent of George Bullock’s work and the table top stands on a circular ring base with six beautifully carved reeded legs fitted with decorative brass castors. This fascinating table represents all the very best elements of English furniture making. There is no mistaking the fine craftsmanship of this handsome table which is certain to become a treasured addition to your furniture collection, and a talking point with your guests at mealtimes. This table is shown with a set of twelve Regency Revival chairs around it which are available if required.   Condition: In really excellent condition having been beautifully cleaned, polished and waxed in our workshops, please see photos for confirmation.

Dimensions in cm:

Height 76 x Width 241 x Depth 241

Height 68 - Skirt height

Dimensions in inches:

Height 2 foot, 6 inches x Width 7 foot, 11 inches x Depth 7 foot, 11 inches

Height 2 foot, 3 inches - Skirt height

£12,000.00
Ref: 00917b
Bespoke Handmade 12ft Burr Walnut Marquetry Dining Table & 12 Chairs

Bespoke Handmade 12ft Burr Walnut Marquetry Dining Table & 12 Chairs

This is a stunning bespoke handmade Victorian Revival extending burr walnut and marquetry dining table with matching set of twelve chairs. There is no mistaking the classic and sophisticated design of this exquisite oval burr walnut dining room table with fabulous marquetry inlaid decoration. This stunning table can comfortably seat twelve, and is also appropriate for a conference room. Whatever its function, it will make a profound impression on your dinner guests or clients and will receive the maximum amount of attention wherever it is placed. This table  is made from burr walnut which  has a beautiful grain, and this has been embellished with superb inlaid marquetry decoration, of ribbons, urns, flowers and vases. It has three leaves of 60 cm each, which can added or removed as required to suit the occasion by a special winding mechanism, and it is raised on five elegantly carved legs that terminate in  brass cap castors. The table top has exquisite hand cut inlaid decorations. These regal decorations include elegant swags and ribbons. To highlight the marquetry, as well as the natural grain of the wood, this table has been French polished by hand. The elegant  set of twelve Louis Revival chairs, hand crafted in Italy, comprises ten side chairs and two armchairs, all upholstered in a decorative grren damask. They each feature a beautifully carved cresting of a bouquet of flowers, the shield backs feature a lattice design with anthemion carved open arms and uprights and they are raised on elegant cabriole legs.  This gorgeous dining set will make a profound impression on your guests and will receive the maximum amount of attention wherever placed.   Condition: This is a new bespoke handmade table and chair set.   The making of a marquetry masterpiece The making of a bespoke marquetry dining table involves many phases - carried out with the highest level of attention to detail - by third generation master craftsmen in our workshop in Italy. First the design of the marquetry is drawn on paper. The paper is then glued on to a sheet of plywood and the veneers are attached to the underside with pins. There can be a maximum of 16 sheets of veneer.  In this case, there are 8 for the burr walnut and 8 for the marquetry. With a fret cutter, using a very fine blade, the marquetry is cut out, using the burr walnut and various coloured veneers to compose the flowers. Today we use an electric fret cutter, although in the 18th and 19th centuries the cutters were operated by treadles. All of the cut out pieces of veneer are then placed on a large tray. They are then singed by being placed in hot sand in a red hot crucible. This singed effect gives different shades to the various veneers, depending on how deep and how long they are left in the hot sand. The various items of veneer are then inserted into the burr walnut one by one. After they are inserted, tape is placed over them to keep them in place. They are then turned over and a sheet of glued paper is placed over them all, after which the tape can be removed. The prepared solid mahogany table is then veneered with mahogany - twice on the under side, horizontally and vertically, and then once on the top side. The prepared marquetry and burr walnut sheet is then placed on top and the whole table top is placed into a hot press, which glues the sheet to the top. The backing paper can then be sanded off. The table top is then veneered 4 times to prevent the top from bowing or warping. Once the assembly is complete, the table is French polished by hand using natural products, resulting in a stunning bespoke masterpiece of marquetry.

Dimensions in cm:

Height 80 x Width 360 x Depth 130 - Fully extended

Height 80 x Width 180 x Depth 130 - Fully closed

Height 99 x Width 60 x Depth 58 - Armchairs

Height 98 x Width 50 x Depth 52 - Side chairs

Height 52 - Seat Height

Dimensions in inches:

Height 2 foot, 7 inches x Width 11 foot, 10 inches x Depth 4 foot, 3 inches - Fully extended

Height 2 foot, 7 inches x Width 5 foot, 11 inches x Depth 4 foot, 3 inches - Fully closed

Height 3 foot, 3 inches x Width 2 feet x Depth 1 foot, 11 inches - Armchairs

Height 3 foot, 3 inches x Width 1 foot, 8 inches x Depth 1 foot, 8 inches - Side chairs

Height 1 foot, 8 inches - Seat Height

£13,750.00
Ref: 00917a
12ft Bespoke Handmade Burr Walnut Marquetry Dining Table & 12 Chairs

12ft Bespoke Handmade Burr Walnut Marquetry Dining Table & 12 Chairs

This bespoke handmade large dining table measures 360 cm (approximately 12 feet) when fully extended. Crafted in the style of a victorian dining table, it features the most superb marquetry and can comfortably accommodate up to twelve people making it suitable not only for dining but equally for use in a boardroom or conference/meeting room. Crafted in top quality burr walnut, which is known to be a beautifully figured timber very popular with furniture makers across the ages, this large dining table also features a plethora of intricate inlaid marquetry designs depicting swags, urns and ribbons. All of the marquetry is handmade and inset. Made from wood veneers of various shades, this large dining table has been expertly French polished by hand to emphasis out the wood grains and marquetry to best effect. The table features a special winding mechanism which is used to enable the fitting of up to three extension leaves of 60 cm (2 feet) each. These can be added or removed as required to suit the occasion. This lovely large dining table has four wonderfully carved legs that also feature marquetry and that terminate in brass cap castors. A set of 12 matching chairs, as shown in the photographs, is supplied with this table. There are ten dining chairs, each measuring 105 cm high x 48 cm wide x 46 cm deep. The two armchairs each measure 105 high x 56 cm wide and 53 cm deep. The set of twelve burr walnut and inlaid chairs match the table beautifully. They are made from solid walnut with upholstered drop in seat pads which can be removed so that the cane seats below can be used in warmer weather, and for cleaning. Condition This large dining table and the set of chairs is brand new and therefore in pristine condition. The Making of a Marquetry Masterpiece Please take a few moments to view the video we have made about how this large dining table was made by our third generation craftsmen in Italy. We are able to build a similar table for you with your own specification marquetry decoration, at extra cost. Will it fit? This is a very large dining table so be careful to measure the space where you would like it to go. When fully extended using all three of the leaves, this large dining table has a height of 80 cm (2 feet, 7 inches) and a depth of 130 cm (4 feet, 3 inches) and a length of 360 cm (11 feet, 10 inches). When closed (the leaves are not being used) the height and depth are the same, but the length is reduced to 180 cm (5 feet, 11 inches). As you can see, even in its reduced format, this is still a large dining table. About Burr Walnut Burr walnut has been used by furniture makers for centuries due to its wonderful swirling figure which adds true glamour to the pieces it is used for. Most walnut wood displays the swirling figure when it is cut and polished, particularly when it is cut from where the trunk of the tree meets the roots. However, ‘true’ burr walnut comes from a rare growth pattern of a walnut tree where hundreds of tiny branches have started to grow. This formation is unusual and rare, so burr walnut usually refers to the more ordinary swirling figures found in more normal growth. More Information A personal viewing is always recommended for a furniture purchase as significant as this. However, if you can’t make the trip, please feel free to email or call us on the above number if you have any questions or queries. We have experts on hand who are always delighted to help. You can also arrange a viewing of this large dining table and also our other stock of Victorian style marquetry large dining tables. Just email or call for an appointment at our North London warehouse, quoting reference 00917A so we know which large dining table & chair set is of interest to you. The showroom is open weekdays, 10am to 5pm and on occasional Saturdays. Bespoke Tables Service Regent Antiques offer a full bespoke dining tables service - we can hand make a table in this style or in a number of other styles, to your own requirements should the size and/or colour of this one not fully meet your needs. Shipping, Delivery and Returns We ship items free of charge to any mainland UK address. If you would like to have this large dining table shipped to a non-UK destination, we will carefully pack and ship this item anywhere worldwide. Please ask us for a shipping quote first before purchasing the large dining table as we need to be sure we can meet your expectations and requirements. If you are not satisfied with your purchase in keeping with the Distance Selling Regulations, we offer a 14-day money back guarantee. You must return this large dining table in its original packaging and condition to be eligible for a refund. Please be aware that you are responsible for paying the return shipping charges, unless we sent you the wrong item, i.e. one that is materially different to what you ordered. Buyers are fully responsible for any customs duties or local taxes that may be incurred on items sent outside of the United Kingdom.

Dimensions in cm:

Height 80 x Width 360 x Depth 130 - Fully extended

Height 80 x Width 180 x Depth 130 - Fully closed

Height 105 x Width 56 x Depth 53 - Armchairs

Height 105 x Width 48 x Depth 46 - Side chairs

Height 53 - Seat Height

Dimensions in inches:

Height 2 foot, 7 inches x Width 11 foot, 10 inches x Depth 4 foot, 3 inches - Fully extended

Height 2 foot, 7 inches x Width 5 foot, 11 inches x Depth 4 foot, 3 inches - Fully closed

Height 3 foot, 5 inches x Width 1 foot, 10 inches x Depth 1 foot, 9 inches - Armchairs

Height 3 foot, 5 inches x Width 1 foot, 7 inches x Depth 1 foot, 6 inches - Side chairs

Height 1 foot, 9 inches - Seat Height

£12,500.00
Ref: 06703
Stunning Handmade 10ft Burr Walnut & Marquetry Bespoke Dining Table

Stunning Handmade 10ft Burr Walnut & Marquetry Bespoke Dining Table

A very fine handmade burr walnut bespoke dining table capable of seating up to 12 people comfortably. This is a large and substantial burr walnut bespoke dining table complete with the most exquisite inlaid marquetry decoration. The marquetry decorations of birds, garlands and vases are hand cut from different veneers of various colours. To highlight the marquetry as well as the natural grain of the burr walnut, this set has been French polished by hand. This table is supplied with two additional leaves. These leaves can be added or removed as required in order to alter the overall length of the table, as the occasion demands. This is accomplished with a special winding mechanism that is easy to operate and makes reconfiguring the table quick and easy. For stability, the substantial table top stands on four sturdy yet very elegantly carved and attractively inlaid legs which are terminated with brass castors for ease of movement around the room. You are looking at what is, undoubtedly, an exceptionally fine marquetry dining table just as it is now but we also offer you the opportunity to order one just like it which can be personalised with the same standard of marquetry designs to your own personal specification. Please note that although some photographs may show chairs to give scale to the pictures, the chairs are not included in the sale. Condition: This large marquetry dining table is a new item, recently manufactured at our workshop in Italy where third generation craftsmen can build every table to order in the exact size and finish you require.

Dimensions in cm:

Height 80 x Width 284 x Depth 124 - Fully extended

Height 80 x Width 164 x Depth 124 - With both leaves removed

Dimensions in inches:

Height 2 foot, 7 inches x Width 9 foot, 4 inches x Depth 4 feet, 1 inch - Fully extended

Height 2 foot, 7 inches x Width 5 foot, 5 inches x Depth 4 feet, 1 inch - With both leaves removed

£5,950.00
Ref: 09642
Antique 12ft Elizabethan Revival Pollard Oak Extending Dining Table 19th C

Antique 12ft Elizabethan Revival Pollard Oak Extending Dining Table 19th C

There is no mistaking the style and sophisticated design of this exquisite rare  antique English Elizabethan Revival pollard oak  extending dining table, circa 1850 in date. The striking rectangular pollard oak top with canted corners, inlaid marquetry decoration to match the fret carved frieze, and a moulded edge over the already mentioned beautiful hand carved frieze. This majestic table has four leaf extensions, can comfortably seat fourteen and has been hand-crafted from solid oak which is not only strong, but has a beautiful grain. The top is in Pollard, oak with twin line inlaid marquetry decoration, which is seen in the intricate burr on the table top. The four leaf extensions can be added or removed as required to suit the occassion by a special winding mechanism. The table is raised on massive hand carved square section legs with blind fret moulding, headed by carved masks, and terminating in  brass castors. This impressive dining table is exemplary of the early Victorian era with its Pollard oak and delicate inlaid marquetry. It will stand out in your dining or conference room and will become the key piece in your furnishing collection.     Condition: In excellent condition having been beautifully cleaned, French polished and waxed in our workshops, please see photos for confirmation.

Dimensions in cm:

Height 77 x Width 360 x Depth 142 - Fully Extended

Height 77 x Width 160 x Depth 142 - With all leaves removed

Dimensions in inches:

Height 2 foot, 6 inches x Width 11 foot, 10 inches x Depth 4 foot, 8 inches - Fully Extended

Height 2 foot, 6 inches x Width 5 foot, 3 inches x Depth 4 foot, 8 inches - With all leaves removed

£38,500.00
Ref: 00059a
Stunning Bespoke Handmade Burr Walnut Marquetry Dining Table & 10 Chairs

Stunning Bespoke Handmade Burr Walnut Marquetry Dining Table & 10 Chairs

A bespoke, handmade burr walnut & marquetry dining table & chairs set with a large table plus ten matching dining chairs. The marquetry can be personalised to suit your requirements at extra cost. This would enable you to incorporate a company logo or brand motifs or perhaps a family crest or coat of arms into your marquetry dining table, making it truly yours. This striking handmade bespoke oval dining table features an array of intricate hand cut marquetry decoration comprising vases, ribbons, urns and decorative garlands. The main timber used for the construction of the table is French burr walnut, a wood that features such a detailed and beautiful grain. To emphasis that grain, this table has been French polished by hand to a high gloss thereby bringing out the fine grain of the burr walnut as well as the inlaid marquetry decoration. Versatility is assured when you take into account that this table can be extended or retracted as required by adding or removing one or two of the two expansion leaves supplied. This is easily done by using the special winding mechanism which is incorporated into the table. Although primarily described as a dining table this set could be equally at home in a boardroom or conference room. This large and substantial oval dining table needs proper support and to that end it is mounted onto four beautifully carved legs which are terminated with brass cap castors to facilitate ease of movement. The Matching Dining Chairs This fine table is supplied with a total of ten burr walnut and inlaid marquetry chairs which complement the table beautifully. The set comprises a pair of armchairs along with a total of eight side chairs. The chairs are made from solid walnut and also feature marquetry decoration along the same lines as the table. For your seating comfort, the chairs in this set have beautifully upholstered and feature drop in seats which can quickly and easily be removed leaving the cane seats below available to provide a cooler seating option in warmer weather. Make It Personal - Our Bespoke Dining Table Service This is a very fine marquetry dining table as it is but we also offer you the opportunity to acquire one just like it which has been personalised with the same standard of marquetry designs that you yourself specify. This could be a family crest or coat of arms. Alternatively, businesses could incorporate their logos, motifs and product names, brands etc into the design of the marquetry table top. Please note that the price quoted is for the standard table as photographed here - there will be an additional charge for personalisation - please contact us to discuss your own, unique requirements and get a quotation. Condition This large oval dining table and chair set is in pristine condition being brand new. More Information? If you’d like any further information about this bespoke dining table & chair set, please email or call us on the above number. We would also be delighted to arrange a viewing in our North London showroom and warehouse where you can see this lovely dining room set close up. You can also view our other antique dining tables and many other pieces if you wish to do so. The showroom is open Mon - Fri 10am to 5pm and on certain Saturdays - please call first if travelling on a Saturday. When emailing or calling us please quote our product reference code for this item which is 00059A so we know exactly which dining set set you are contacting us about. Shipping, Delivery and Returns We ship items free of charge to any mainland UK address. If you would like to have this bespoke marquetry dining table and chair set shipped to a non-UK destination, we will carefully pack and ship this item anywhere worldwide. Please ask us for a shipping quote first before purchasing the large dining table as we need to be sure we can meet your expectations and requirements. If you are not satisfied with your purchase in keeping with the Distance Selling Regulations, we offer a 14-day money back guarantee. You must return this large dining table in its original packaging and condition to be eligible for a refund. Please be aware that you are responsible for paying the return shipping charges, unless we sent you the wrong item, i.e. one that is materially different to what you ordered. Buyers are fully responsible for any customs duties or local taxes that may be incurred on items sent outside of the United Kingdom.

Dimensions in cm:

Height 78 x Width 305 x Depth 121 - Fully extended

Height 78 x Width 185 x Depth 121 - Closed

Height 105 x Width 56 x Depth 53 - Armchairs

Height 105 x Width 48 x Depth 46 - Chairs

Height 53 - Seat Height

Dimensions in inches:

Height 2 foot, 7 inches x Width 10 foot x Depth 4 feet - Fully extended

Height 2 foot, 7 inches x Width 6 feet, 1 inch x Depth 4 feet - Closed

Height 3 foot, 5 inches x Width 1 foot, 10 inches x Depth 1 foot, 9 inches - Armchairs

Height 3 foot, 5 inches x Width 1 foot, 7 inches x Depth 1 foot, 6 inches - Chairs

Height 1 foot, 9 inches - Seat Height

£9,500.00
Ref: 09979a
Bespoke 7ft Diameter Flame Mahogany Jupe Dining Table 21st C

Bespoke 7ft Diameter Flame Mahogany Jupe Dining Table 21st C

This is a beautiful bespoke contemporary flame mahogany Regency style 'Jupe' dining table which can seat eight people in great comfort and can accomodate ten when required.  We make this to order so we can make it to your bespoke size, finishes and specifications. The flame mahogany veneers on the top have been arranged so as to give a sunburst effect and it is finished off by the elegant crossbanding on the outside edge. The table is very solid as there is circular base with four columns which give the table its superb stability, raised on four splayed legs terminating in brass castors.   There are slides that pull out from the sides of the table and you fit the leaves on them by placing them on the slides and securing them with brass clips, which are located on the underside of the leaves.     This fascinating table illustrates all the very best elements of English cabinet-making combined with the remarkable burst of inventiveness of the Industrial Revolution. It was not until John Johnstone and Robert Jupe patented their ingenious design in March 1835 for an expanding round table,that round dining tables, which had suffered from the problem of not offering flexibility of seating, could compete with the established rectangular extending dining tables.   There is no mistaking the fine craftsmanship of this handsome table, which is certain to become a treasured addition to your furniture collection, and a talking point with guests at meal times.   The matching set of  chairs shown in the photographs are available for sale if required or please see our website for other options.   Condition: In excellent condition, please see photos for confirmation of condition.  

Dimensions in cm:

Height 76 x Width 152 x Depth 152 - With leaves removed

Height 76 x Width 206 x Depth 206 - Extended

Dimensions in inches:

Height 2 foot, 6 inches x Width 5 feet x Depth 5 feet - With leaves removed

Height 2 foot, 6 inches x Width 6 foot, 9 inches x Depth 6 foot, 9 inches - Extended

£8,750.00
Ref: 08324
Antique Regency George III Pembroke Table Gillows

Antique Regency George III Pembroke Table Gillows c.1820

This Pembroke antique dining table is unmistakable in sophistication and style dating from the Regency period and attributed to Gillows, the famous furniture makers mentioned by the likes of Jane Austen and Thackeray in their works. This antique dining table has been hand-crafted from solid mahogany which was the wood of choice for fine furniture makers due to its durability and also its beautiful grain which provides a lovely colour and patina. Above an end frieze drawer, the table has twin rounded flaps creating a rectangular top. The table top is crossbanded around the edge which provides stylish and subtle decoration. This antique dining table is raised on four fluted uprights on a quadripartite base which features ornate brass caps and castors. It was originally purchased from Messrs Christies Auctioneers in the Mere Hall auction on 23rd May 1994 as lot 56. Condition: As seen from the photos, this antique Regency dining table is in excellent condition. Origin of ‘Pembroke’ Tables The name ‘Pembroke Table’ is highly debated, but it’s believed to be named after Mary Herbert, the Countess of Pembroke (1561-1621) who was the first person to order a folding flap table design. They were first introduced as a type of table in the 18th century and remained popular throughout the 19th century due to their flexibility. They are characterised by having an oval or rectangular top with folding or drop leaves on each side. Most examples have four legs which are sometimes connected by stretchers and also have one or more drawers in the frieze. This design means they can be easily stored and moved about and opened for dining, serving tea or writing. Gillows Gillows & Co, based in Lancaster with a later shop in London, were furniture makers whose name became a byword for quality. The firm was started in about 1730 by Robert Gillow who was joined in business by his son Richard Gillow in 1754. They are noted for their use of mahogany wood, which they were able to import directly from the Americas through owning a twelfth share in the trading ship Bridget. The success of the firm was partly based on this fact. They set up a London branch in 1760 and a London shop in 1770 and went on to win commissions to furnish and decorate public buildings across the world as well as for British aristocratic houses such as Tatton Hall. Pieces from Gillows can now be seen in museums in London, Leeds, Adelaide, Melbourne and Auckland as well as in their own Gillows Museum in Lancaster. Viewing and Further Information We are always delighted to discuss our antique dining tables, and would be happy to answer any questions you might have. Just email or call us on the above number and our experts will be on hand to discuss your requirements. You can also arrange an appointment to view this antique dining table or others we have in stock in our North London warehouse, just call or email. Please quote our reference: 08324 so we know which antique dining table you are talking about. The showroom is open every weekday from 10am to 5pm and on occasional Saturdays - please call to confirm before travelling on a Saturday. Shipping, Delivery and Returns We can carefully pack and ship your antique Regency dining table to any destination worldwide, but please do ring for a quotation first, before purchasing the item. We deliver to all mainland UK addresses free of charge. If you are not satisfied with this Pembroke dining table we offer a 14-day money back guarantee as required by the Distance Selling Regulations. You will be liable for the return shipping costs unless we have failed to describe the item you receive in some material way. You must return the item in its original packing and condition. Buyers are fully responsible for any customs duties or local taxes that may be incurred on items sent outside of the United Kingdom.

Dimensions in cm:

Height 72 x Width 118 x Depth 100 - Fully open

Height 72 x Width 56 x Depth 100 - With flaps down

Dimensions in inches:

Height 2 foot, 4 inches x Width 3 foot, 10 inches x Depth 3 foot, 3 inches - Fully open

Height 2 foot, 4 inches x Width 1 foot, 10 inches x Depth 3 foot, 3 inches - With flaps down

£2,250.00
Ref: 06494a
Huge Bespoke Handmade Marquetry Walnut Extending Dining Table 18 Chairs

Huge Bespoke Handmade Marquetry Walnut Extending Dining Table 18 Chairs

Seating up to eighteen people in great comfort, this is a very large Bespoke Handmade Marquetry Walnut Extending Dining Table in a popular Victorian style, supplied with a matching set of 18 chairs. This table would be equally at home in a corporate or commercial location, e.g. in a company boardroom or in a conference room. With all the extension leaves in place it would easily accommodate up to 18 people. This handmade large marquetry dining table is a very substantial piece of furniture suitable for a variety of uses. It is made in the Victorian style and it features an array of superb marquetry decoration painstakingly made in our own facility in Italy by third generation artisans. It is made from burr walnut which has has been used by fine furniture craftsmen for hundreds of years due to its lovely figured grain. This large dining table incorporates exquisite inlaid marquetry decoration featuring a variety of flowers together with urns, vases and lots of ribbons. Made from a variety of wood veneers of various colours which are shown to their best effect by the French polishing process that has been carried out on this large dining table, by hand, in order to show off the glorious wood grains to the best effect. A table for many purposes and of variable size This table is fitted with a double wind out mechanism which is used to alter the overall length in order to accommodate the four expansion leaves. The leaves can be separately added as required or removed, to provide a very flexible length table to suit any occasion. A table this big needs lots of support and it gets it from the six sturdy legs which ensure it is stable. Each of the legs terminates on brass cap castors for ease of movement. Condition This large dining table is new and is therefore in showroom condition. Winding Mechanism for extending tables A certain Mr Joseph Fitter became the pioneer developer of the screw mechanism that enables a table winding mechanism to work having bought the patent and business from a Mr Samuel Hawkins in 1864. Mr Fitter adapted the screw expander for tables and also used it for other items of furniture such as piano stools. More Information and Viewing Our in-house bespoke furniture team would be delighted to discuss this large dining table with you and our experts are always happy to answer any questions or queries that you may have. Please email or call us on the number shown above quoting reference number 06494A. We would also be pleased to arrange a viewing of this piece or any other of our large dining tables in our North London showroom and warehouse. We are open Mon - Fri 10am to 5pm and sometimes also open on a Saturday - call before making a trip, thank you. Shipping, Delivery and Returns We ship items free of charge to any mainland UK address. If you would like to have this large bespoke dining table and chair set shipped to a non-UK destination, we will carefully pack and ship this item anywhere worldwide. Please ask us for a shipping quote first before purchasing the large dining table as we need to be sure we can meet your expectations and requirements. If you are not satisfied with your purchase in keeping with the Distance Selling Regulations, we offer a 14-day money back guarantee. You must return this large dining table in its original packaging and condition to be eligible for a refund. Please be aware that you are responsible for paying the return shipping charges, unless we sent you the wrong item, i.e. one that is materially different to what you ordered. Buyers are fully responsible for any customs duties or local taxes that may be incurred on items sent outside of the United Kingdom.

Dimensions in cm:

Height 79 x Width 500 x Depth 150 - fully extended

Height 79 x Width 180 x Depth 150 - when completely closed

Height 105 x Width 56 x Depth 53 - 2 Armchairs

Height 105 x Width 48 x Depth 46 - 16 Side chairs

Height 53 - Seat Height

Dimensions in inches:

Height 2 foot, 7 inches x Width 16 foot, 5 inches x Depth 4 foot, 11 inches - fully extended

Height 2 foot, 7 inches x Width 5 foot, 11 inches x Depth 4 foot, 11 inches - when completely closed

Height 3 foot, 5 inches x Width 1 foot, 10 inches x Depth 1 foot, 9 inches - 2 Armchairs

Height 3 foot, 5 inches x Width 1 foot, 7 inches x Depth 1 foot, 6 inches - 16 Side chairs

Height 1 foot, 9 inches - Seat Height

£18,250.00
Ref: 06494
Huge Handmade 17ft Marquetry Burr Walnut Bespoke Dining Table

Huge Handmade 17ft Marquetry Burr Walnut Bespoke Dining Table

This large Victorian style bespoke dining table features superb marquetry and seats sixteen people in total comfort. It measures 5 meters (17 feet) when fully extended. This large dining table is a wonderful piece of luxury furniture which would equally as well be at home as a conference table or bespoke piece for a commercial venue such as a hotel or restaurant. Burr walnut has been used by fine furniture craftsmen for centuries due to its beautifully-shaped grain. This particular large dining table also incorporates exquisite inlaid marquetry decoration featuring flowers, urns, vases and ribbons. Made from wood veneers of various colours, we have French polished this large dining table by hand to show off the glorious wood grains to best effect. This lovely large dining table has six legs to ensure it is fully stable and each leg terminates with a brass cap castor. Condition This large dining table is newly made and is therefore in pristine condition. The Making of this Marquetry Masterpiece We have made a video above to show you how this spectacular large dining table was made. Please take a few moments to watch it. In our Italian workshop we are very lucky to have third-generation master craftspeople where this lovely large dining table was handcrafted to a bespoke design. As you can see from the photos and video it has been made with the greatest attention to detail, right down to individually hand colouring each small piece of marquetry veneer.

Dimensions in cm:

Height 79 x Width 500 x Depth 150 - when fully extended

Height 79 x Width 180 x Depth 150 - when fully closed

Dimensions in inches:

Height 2 foot, 7 inches x Width 16 foot, 5 inches x Depth 4 foot, 11 inches - when fully extended

Height 2 foot, 7 inches x Width 5 foot, 11 inches x Depth 4 foot, 11 inches - when fully closed

£12,500.00
Ref: 00917
12ft Victorian Style Burr Walnut Marquetry Bespoke Dining Table

12ft Victorian Style Burr Walnut Marquetry Bespoke Dining Table

This large bespoke dining table, crafted in the Victorian style, features superb marquetry and comfortably seats twelve people. It measures 360 cm (approximately 12 feet) when fully extended.  This large bespoke dining table is a wonderful piece of elegant furniture which would work equally well as a conference table or as a bespoke table for a venue such as a restaurant or hotel. Crafted in burr walnut, a beautifully-figured wood, this large dining table also features wonderful inlaid marquetry designs of swags, urns and ribbons all hand-made and inset by hand. Made from wood veneers of various shades, this large dining table has been expertly French polished by hand using natural materials to bring out the gorgeous wood grains and show off the marquetry to the very best effect. Featuring a special winding mechanism, there are three leaves of 60 cm (2 feet) each, which can be added or removed as needed to suit any occasion. This lovely large dining table has four wonderfully-carved legs that also feature marquetry and terminate in brass castors. The matching chairs shown in the photographs are also available as a separate purchase. Condition This large dining table is brand new, so is in pristine condition. The Making of this Marquetry Masterpiece Please take a few moments to view the video above we have created about how this large dining table was made. We consider ourselves very lucky to have third-generation master craftsmen and women in our workshops based in Italy who are highly skilled in crafting handmade tables with inlaid marquetry.

Dimensions in cm:

Height 80 x Width 360 x Depth 130 - Fully extended

Height 80 x Width 180 x Depth 130 - Fully closed

3 x 60 cm leaves

Dimensions in inches:

Height 2 foot, 7 inches x Width 11 foot, 10 inches x Depth 4 foot, 3 inches - Fully extended

Height 2 foot, 7 inches x Width 5 foot, 11 inches x Depth 4 foot, 3 inches - Fully closed

3 x 60 cm leaves

£7,250.00
Ref: 01033
Bespoke Monumental 11metre 35ft walnut marquetry dining conference table

Bespoke Monumental 11metre 35ft walnut marquetry dining conference table

There is no mistaking the classic and sophisticated design of this gorgeous bespoke burr walnut and marquetry dining table which can seat thirty six people in comfort.  The table is made from burr walnut which has a beautiful grain with exquisite marquetry decorations which include bouquets of flowers, musical instruments, vases, swirls and geometric designs. It has eight 3ft leaves which can be added or removed as required to suit the occasion by a special double wind out mechanism.  When all the leaves are removed the table is transformed into a mid sized oval dining table.  The table is raised on eight elegant hand carved reeded legs which terminate in brass cap castors. The 36 chairs are not included in the price but can be purchased if required. THIS IS A BESPOKE ITEM AND CAN BE MADE TO YOUR SPECIFICATIONS IF REQUIRED.   Condition: This is a new bespoke handmade table.   The making of a marquetry masterpiece The making of a bespoke marquetry dining table involves many phases - carried out with the highest level of attention to detail - by third generation master craftsmen in our workshop in Italy. First the design of the marquetry is drawn on paper. The paper is then glued on to a sheet of plywood and the veneers are attached to the underside with pins. There can be a maximum of 16 sheets of veneer.  In this case, there are 8 for the burr walnut and 8 for the marquetry. With a fret cutter, using a very fine blade, the marquetry is cut out, using the burr walnut and various coloured veneers to compose the flowers. Today we use an electric fret cutter, although in the 18th and 19th centuries the cutters were operated by treadles. All of the cut out pieces of veneer are then placed on a large tray. They are then singed by being placed in hot sand in a red hot crucible. This singed effect gives different shades to the various veneers, depending on how deep and how long they are left in the hot sand. The various items of veneer are then inserted into the burr walnut one by one. After they are inserted, tape is placed over them to keep them in place. They are then turned over and a sheet of glued paper is placed over them all, after which the tape can be removed. The prepared solid mahogany table is then veneered with mahogany - twice on the under side, horizontally and vertically, and then once on the top side. The prepared marquetry and burr walnut sheet is then placed on top and the whole table top is placed into a hot press, which glues the sheet to the top. The backing paper can then be sanded off. The table top is then veneered 4 times to prevent the top from bowing or warping. Once the assembly is complete, the table is French polished by hand using natural products, resulting in a stunning bespoke masterpiece of marquetry.    

Dimensions in cm:

Height 82 x Width 1,070 x Depth 170 - Fully Extended

Height 82 x Width 350 x Depth 170 - With all leaves removed

Dimensions in inches:

Height 2 foot, 8 inches x Width 35 feet, 1 inch x Depth 5 foot, 7 inches - Fully Extended

Height 2 foot, 8 inches x Width 11 foot, 6 inches x Depth 5 foot, 7 inches - With all leaves removed

£42,500.00
Ref: 00059
Stunning Burr Walnut 10ft Oval Marquetry Bespoke Dining Table

Stunning Burr Walnut 10ft Oval Marquetry Bespoke Dining Table

This lovely large oval bespoke dining table features gorgeous hand cut marquetry comprising urns, vases ribbons and garlands and French burr walnut. This table has been French polished to the highest gloss bringing out the fine grains of the burr walnut and inlaid marquetry pieces. When fully extended this large oval dining table can comfortably seat ten people. The table can be extended or reduced by the addition or removal of two leaves using the special winding mechanism incorporated into the table. When the two leaves are removed the table is transformed into a six seat oval dining table. This wonderful large oval dining table is raised on four beautifully-carved legs that terminate in brass castors. The matching chairs featured in the photographs are also available by separate purchase. This is a very fine marquetry dining table as it is but we also offer you the opportunity to acquire one just like it that has been personalised with marquetry designs that you specify.  Please note that the price quoted is for the standard table as photographed here - there will be an additional charge for personalisation - please contact us to discuss your requirements. Condition This large oval dining table is in pristine condition being brand new. The Making of this Marquetry Masterpiece Marquetry is a highly skilled art and we have created the video to show you just how this lovely large oval dining table was made in our Italian workshops by third generation master craftsmen and women. Please take a few moments to watch this video in order to fully appreciate what a fine piece of furniture this is.

Dimensions in cm:

Height 78 x Width 305 x Depth 121 - Fully extended

Height 78 x Width 185 x Depth 121 - With both leaves removed

Dimensions in inches:

Height 2 foot, 7 inches x Width 10 foot x Depth 4 feet - Fully extended

Height 2 foot, 7 inches x Width 6 feet, 1 inch x Depth 4 feet - With both leaves removed

£5,250.00

Follow Us